{"title":"Ambrosia Filament","description":"\u003cp\u003eShop Ambrosia ASA, PC-CF and PPS-CF filament in a choice of spool sizes for compatible 3D printers. PC-CF and PPS-CF are carbon-fiber-filled materials with different base polymers. ASA is a separate material; each product requires its own printing setup.\u003c\/p\u003e\u003ch2\u003ePC-CF or PPS-CF?\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"\/products\/ambrosia-pc-cf-filament-of-the-gods-1kg-bambu-ams-friendly-cardboard-spools-premium-3d-printing-filament-house-polycarbonate-cf-pccf\"\u003ePC-CF\u003c\/a\u003e is a polycarbonate blend available in Black, Blue and Red, with a specified 250–290°C extrusion range. \u003ca href=\"\/products\/ambrosia-pps-cf-filament-of-the-gods-1kg-high-temperature-polycarbonate-spools-premium-3d-printing-filament\"\u003ePPS-CF\u003c\/a\u003e uses polyphenylene sulfide and specifies 300–350°C extrusion.\u003c\/p\u003e\u003ch2\u003eCheck your printer before ordering\u003c\/h2\u003e\u003cp\u003eCompare nozzle, heated-bed and chamber requirements. Both materials are abrasive; follow the manufacturer’s nozzle, ventilation, protective-equipment and storage guidance. Spool temperature limits and feed-system compatibility vary by product.\u003c\/p\u003e\u003cp\u003eExplore all \u003ca href=\"\/collections\/3d-printing\"\u003e3D printing supplies\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eLarge ASA spools\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"\/products\/ambrosia-asa-filament-of-the-gods-2kg-5kg-large-spool-premium-3d-printing-filament-house-asa\"\u003eAmbrosia ASA in 2 kg and 5 kg spools\u003c\/a\u003e offers Black and Voron Red options. These large plastic spools require a suitable holder; check size, weight and printer temperatures before ordering.\u003c\/p\u003e","products":[{"product_id":"ambrosia-pps-cf-filament-of-the-gods-1kg-high-temperature-polycarbonate-spools-premium-3d-printing-filament","title":"Ambrosia PPS-CF 1.75 mm Carbon Fiber Filament — 1 kg","description":"\u003cp\u003eAmbrosia PPS-CF is a 1.75 mm carbon-fiber-filled polyphenylene sulfide filament supplied as a 1 kg spool. It is intended for high-temperature 3D printing setups; confirm your printer can meet the temperatures and material-handling requirements below.\u003c\/p\u003e\u003ch2\u003eBefore you print\u003c\/h2\u003e\u003cp\u003eThe polycarbonate in the original product name describes the spool, not the filament. PPS-CF is abrasive: the manufacturer strongly recommends a tungsten carbide nozzle. Do not assume compatibility with a standard AMS feed path; tight bends can break the filament.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThis filament is highly abrasive, we strongly recommend printing with Tungsten Carbide Nozzle like the \u003ca href=\"https:\/\/west3d.com\/products\/west3ds-undertaker-tungsten-carbide-nozzle\"\u003eUndertaker\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE: If using an AMS we recommend only using an AMT HT with the filament bypass as the filament may break with the extreme bends in the AMS unit. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeed your Printer the Filament of the Gods.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured to a tighter than standard tolerance (+\/- 0.03mm) you'll experience consistent extrusion throughout the spool. \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeed your Printer the Filament of the Gods.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePPS-CF (Polyphenylene Sulfide - Carbon Fiber) \u003cspan style=\"font-size: 0.875rem;\"\u003efilament offers superior industrial performance over standard materials like ABS, featuring \u003c\/span\u003e extremely high heat resistance, exceptional chemical resistance, high stiffness, and low moisture absorption\u003cspan style=\"font-size: 0.875rem;\"\u003e. It is a high-performance material ideal for harsh environments, providing superior dimensional stability, reduced warping, and greater strength, making it suitable for automotive and aerospace applications.\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eArrives to you in a cardboard box, with filament wound in a polycarbonate spool, vacuum sealed with a desiccant bag.\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm (+\/-0.03mm)\u003c\/li\u003e\n\u003cli\u003eFilament Net Weight: 1KG\u003c\/li\u003e\n\u003cli\u003eSpool Weight: 130G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExplore \u003ca href=\"\/collections\/ambrosia-filament\"\u003eAmbrosia filament\u003c\/a\u003e and our \u003ca href=\"\/collections\/3d-printing\"\u003e3D printing collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAmbrosia Filament's Recommended Print Settings for our PPS-CF filament:\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 133px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eAccepted Value(s) [Our Recommended Value]\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eExtruder Temperature\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\n\u003cstrong\u003e300-350 Degrees \u003c\/strong\u003e\u003cb\u003eCelsius [340]\u003c\/b\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eHeated Bed\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003e90-110 Degrees Celsius [100]\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eBuild Surface\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003ePEI, Buildtak, or similar surface [Textured PEI]\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eCooling Fan\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003e0-40% range varies by cooling capabilities\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eEnvironmental Temperatures\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cb\u003e40-120C [70C]\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eSoluble Support Materials\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTechnical Specifications for our PPS-CF Filament:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 20.59375px;\"\u003e\n\u003ctd style=\"height: 20.59375px;\"\u003e \u003cstrong\u003ePhysical Properties\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 20.59375px;\"\u003e\u003cstrong\u003eTest Methodology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 20.59375px;\"\u003e\u003cstrong\u003eValues\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO1183\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e1.3-1.31 g\/cm^3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eMelt Flow Rate (250C\/2.16KG)\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 1133\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e3-6 g\/10min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eMechanical Properties\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eTest Methodology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eValues\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 527\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e100-110 Mpa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eElongation at break\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 527\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e1-3%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eFlexural Modulus\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 527\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e5500-6000 Mpa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eFlexural Strength\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 178\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e170-180 Mpa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 180\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e25-30 KJ\/m^2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eThermal Dynamic Properties\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eTest Methodology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eValues\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eHDT@ 0.455 MPa(66 psi)\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 75\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e245C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFilament can absorb moisture easily. \u003c\/span\u003eTo prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with \u003cspan\u003edesiccant. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eDisclaimer: Filaments, including this product, may emit toxic fumes (\u003cspan\u003eVolatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cp\u003eOne 1 kg spool of 1.75 mm PPS-CF filament, vacuum sealed with desiccant and packed in a cardboard box. Printer and nozzle are not included.\u003c\/p\u003e\u003ch2\u003eLooking for a polycarbonate blend?\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"\/products\/ambrosia-pc-cf-filament-of-the-gods-1kg-bambu-ams-friendly-cardboard-spools-premium-3d-printing-filament-house-polycarbonate-cf-pccf\"\u003eAmbrosia PC-CF\u003c\/a\u003e is a separate carbon-fiber polycarbonate blend with different temperature requirements. Compare its material profile with PPS-CF before choosing a spool.\u003c\/p\u003e","brand":"Ambrosia Filament","offers":[{"title":"Default Title","offer_id":60813909197086,"sku":"AMB4401PPS","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1101\/2148\/4574\/files\/ambrosia-pps-cf-filament-of-the-gods-1kg-bambu-ams-friendly-high-temperature-polycarbonate-spools-premium-3d-printing-filament-west3d-3d-printing-supplies-ambro-8844891.jpg?v=1793726331"},{"product_id":"ambrosia-pc-cf-filament-of-the-gods-1kg-bambu-ams-friendly-cardboard-spools-premium-3d-printing-filament-house-polycarbonate-cf-pccf","title":"Ambrosia PC-CF 1.75 mm Carbon Fiber Filament — 1 kg","description":"\u003cp\u003eAmbrosia PC-CF is a carbon-fiber-filled polycarbonate blend supplied as one 1 kg spool of 1.75 mm filament in your selected color. Choose Black, Blue or Red. It requires a heated bed, suitable chamber and an abrasion-resistant nozzle.\u003c\/p\u003e\u003ch2\u003eCheck your printing setup\u003c\/h2\u003e\u003cp\u003eThe manufacturer specifies 250–290°C extrusion and a 100–115°C bed. The cardboard spool adhesive is rated for 70°C; follow the spool-handling guidance below when drying or using a hotter environment.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThis filament is highly abrasive, we strongly recommend printing with Tungsten Carbide Nozzle like the \u003c\/strong\u003e\u003ca href=\"https:\/\/west3d.com\/products\/west3ds-undertaker-tungsten-carbide-nozzle\"\u003e\u003cstrong\u003eUndertaker\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAmbrosia Filament's line of Polycarbonate Carbon Fiber blend of filament is designed to be printable without sacrifice. Manufactured to a tighter than standard tolerance (+\/- 0.03mm) you'll experience consistent extrusion throughout the spool. \u003c\/p\u003e\n\u003cp\u003ePolycarbonate filament requires a heated bed, chamber and printing at higher temperatures than other common filaments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeed your Printer the Filament of the Gods.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePCCF (\u003cspan\u003epolycarbonate + carbon fiber) \u003c\/span\u003ecombines advantages of PC filament with easier printing. This filament includes a blend of approximately 10% PETG to promote a better printing experience without sacrificing the properties of PC or CF. The filament both provides better heat resistance, strength and toughness than ABS or other common filaments with printability only being marginally tougher. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eArrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm (+\/-0.03mm)\u003c\/li\u003e\n\u003cli\u003eFilament Net Weight: 1KG\u003c\/li\u003e\n\u003cli\u003eSpool Weight: 130G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (\u003ca href=\"https:\/\/www.printables.com\/model\/456614-cardboard-spool-ring-and-clamp\/files\"\u003eHere\u003c\/a\u003e)\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/ambrosia-filament\"\u003eAmbrosia filament\u003c\/a\u003e and all \u003ca href=\"\/collections\/3d-printing\"\u003e3D printing supplies\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAmbrosia Filament's Recommended Print Settings for our PC-CF filament:\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eAccepted Value(s) [Our Recommended Value]\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder Temperature\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e250-290 Degrees \u003c\/strong\u003e\u003cb\u003eCelsius [270]\u003c\/b\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeated Bed\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e100-115 Degrees Celsius [110]\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Surface\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePEA, PEI, Buildtak, or similar surface [Smooth PEI or PEA with adhesive]\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling Fan\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e0-70% range varies by cooling capabilities\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental Temperatures\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e40-120C [60C]\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoluble Support Materials\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eHIPS or other Water Soluble Support Material\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTechnical Specifications for our PCCF Filament:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 20.59375px;\"\u003e\n\u003ctd style=\"height: 20.59375px;\"\u003e \u003cstrong\u003ePhysical Properties\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 20.59375px;\"\u003e\u003cstrong\u003eTest Methodology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 20.59375px;\"\u003e\u003cstrong\u003eValues\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO1183\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e1.21g\/cc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eMelt Flow Rate (250C\/2.16KG)\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 1133\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e10g\/10m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eMoisture Absorption (23C\/24h)\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 62\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u0026lt;.2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eMechanical Properties\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eTest Methodology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eValues\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 527\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e40MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eElongation at break\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 527\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e7.5-8.5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eFlexural Modulus\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 527\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e2400MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eFlexural Strength\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 178\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e85MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 180\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\n\u003cp\u003e\u003cspan\u003e5.5KJ\/m2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eThermal Dynamic Properties\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eTest Methodology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eValues\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eHDT@ 0.455 MPa(66 psi)\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 75\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e120C \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFilament can absorb moisture easily. \u003c\/span\u003eTo prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with \u003cspan\u003edesiccant. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eDisclaimer: Filaments, including this product, may emit toxic fumes (\u003cspan\u003eVolatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003cspan\u003eCARBON FIBER FILAMENTS HAVE INCREASED RISK OF USE AND SHOULD NOT BE SANDED OR USED WITHOUT PROPER EQUIPMENT. HANDLE WITH CARE, USING APPROPRIATE TOOLS AND PROTECTIVE WEAR (E.G. GLOVES) WHEN HANDLING. ONLY USE IN A WELL VENTILATED AREA, WITH PROPER RESPIRATION EQUIPMENT. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003cspan\u003e Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\u003ch2\u003ePC-CF or PPS-CF?\u003c\/h2\u003e\u003cp\u003ePC-CF and \u003ca href=\"\/products\/ambrosia-pps-cf-filament-of-the-gods-1kg-high-temperature-polycarbonate-spools-premium-3d-printing-filament\"\u003eAmbrosia PPS-CF\u003c\/a\u003e use different base polymers and printing temperatures. Compare the material profile with your printer’s limits; they are not interchangeable printing presets.\u003c\/p\u003e","brand":"Ambrosia Filament","offers":[{"title":"Black","offer_id":60813926531358,"sku":"AMB1731","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":60813926564126,"sku":"AMB1732","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":60813926596894,"sku":"AMB1733","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1101\/2148\/4574\/files\/ambrosia-pc-cf-filament-of-the-gods-1kg-bambu-ams-friendly-cardboard-spools-premium-3d-printing-filament-house-polycarbonate-cf-pccf-west3d-3d-printing-supplies-408150.jpg?v=1793726772"},{"product_id":"ambrosia-asa-filament-of-the-gods-2kg-5kg-large-spool-premium-3d-printing-filament-house-asa","title":"Ambrosia ASA 1.75 mm Filament — 2 kg \u0026 5 kg Large Spools","description":"\u003cp\u003eAmbrosia ASA filament comes in a single large plastic spool: choose 2 kg or 5 kg, in Black or Voron Red. The filament diameter is 1.75 mm with a stated ±0.03 mm tolerance. Check your spool holder’s size and load capacity before ordering.\u003c\/p\u003e\u003ch2\u003ePrepare your printer\u003c\/h2\u003e\u003cp\u003eA heated bed is required and the manufacturer strongly encourages an enclosure. The recommended extrusion range is 230–260°C, with a 100–115°C bed. These large spools should not be assumed to fit a standard enclosed filament feeder.\u003c\/p\u003e\u003cp\u003eYou wanted it larger, here you go! Specifically for our business and high volume printing partners, we have the filament you love in higher capacities. \u003cem\u003eThese are made with a plastic spool.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eAmbrosia Filament's line of ASA filament is derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+\/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFeed your Printer the Filament of the Gods.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eASA is the natural successor to ABS and is great for both mechanical, functional or decorative parts. It prints well, with less warping than some other filaments, however it is highly encouraged to use an enclosure. A heated bed is required.ASA filament has high strength, impact and weather resistance (including UV), and can withstand higher temperatures than many common filaments (e.g. PLA\/PETG). \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eArrives to you in a cardboard box, with filament wound in a plastic spool, sealed with a desiccant bag.\u003c\/li\u003e\n\u003cli\u003eDerived from 100% Virgin (Grade-A) non-toxic pellets\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm (+\/-0.03mm)\u003c\/li\u003e\n\u003cli\u003eFilament Net Weight: 2KG \/ 5KG\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExplore \u003ca href=\"\/collections\/ambrosia-filament\"\u003eAmbrosia filament\u003c\/a\u003e and all \u003ca href=\"\/collections\/3d-printing\"\u003e3D printing supplies\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAmbrosia Filament's Recommended Print Settings for our ASA filament:\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eAccepted Value(s) [Our Recommended Value]\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder Temperature\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e230-260 Degrees \u003c\/strong\u003e\u003cb\u003eCelsius [250]\u003c\/b\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeated Bed\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e100-115 Degrees Celsius [110]\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Surface\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePEI, Buildtak, or similar surface [Textured PEI]\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling Fan\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e0-70% range varies by cooling capabilities\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental Temperatures\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e40-120C [45C]\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoluble Support Materials\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eHIPS\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTechnical Specifications for our ASA Filament:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 20.59375px;\"\u003e\n\u003ctd style=\"height: 20.59375px;\"\u003e \u003cstrong\u003ePhysical Properties\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 20.59375px;\"\u003e\u003cstrong\u003eTest Methodology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 20.59375px;\"\u003e\u003cstrong\u003eValues\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO1183\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e1.08-1.09 g\/cm^3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eMelt Flow Rate (250C\/2.16KG)\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 1133\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e20-25 g\/10min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eMechanical Properties\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eTest Methodology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eValues\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 527\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e42-45 Mpa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eElongation at break\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 527\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e9-12%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eFlexural Modulus\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 527\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e1200-1400 Mpa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eFlexural Strength\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 178\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e75-79 Mpa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 180\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e19-20 KJ\/m^2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eThermal Dynamic Properties\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eTest Methodology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e\u003cstrong\u003eValues\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px;\"\u003eHDT@ 0.455 MPa(66 psi)\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003eISO 75\u003c\/td\u003e\n\u003ctd style=\"height: 19px;\"\u003e88C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFilament can absorb moisture easily. \u003c\/span\u003eTo prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with \u003cspan\u003edesiccant. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eDisclaimer: Filaments, including this product, may emit toxic fumes (\u003cspan\u003eVolatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cp\u003eOne spool of ASA filament in the selected weight and color, sealed with desiccant and packed in a cardboard box. A printer, enclosure and spool holder are not included.\u003c\/p\u003e","brand":"Ambrosia Filament","offers":[{"title":"2kg \/ Black","offer_id":60813934199070,"sku":"AMB2052","price":44.99,"currency_code":"USD","in_stock":false},{"title":"2kg \/ Voron Red","offer_id":60813934231838,"sku":"AMB2053","price":44.99,"currency_code":"USD","in_stock":true},{"title":"5kg \/ Black","offer_id":60813934264606,"sku":"AMB2054","price":99.99,"currency_code":"USD","in_stock":true},{"title":"5kg \/ Voron Red","offer_id":60813934297374,"sku":"AMB2055","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1101\/2148\/4574\/files\/ambrosia-asa-filament-of-the-gods-2kg-5kg-large-spool-premium-3d-printing-filament-house-asa-west3d-3d-printing-supplies-ambrosia-filament-859403.jpg?v=1793727060"}],"url":"https:\/\/apextechnica.com\/collections\/ambrosia-filament.oembed","provider":"Apex Technica","version":"1.0","type":"link"}